To Reset the 2300-NET back to its factory address of 192.168.0.112:

1. Power down 2300-NET
2. Remove cover of 2300-NET.
3. Remove link that shows "Default IP"
4. Power up 2300-NET, leave on for 5 seconds, then  power down.
5. Insert link that shows "Default IP"
6. Power up 2300-NET, replace cover of 2300-NET.

The unit will now respond to 192.168.0.112

IMPORTANT: When default IP settings are loaded, the unit is set to RS232 mode. Using the web browser, connect to 192.168.0.112 and set the communications port to RS485 and click submit, otherwise comms to the 2300-XX stations will NOT work.