Network Passive Startup And Security

Network Setup

Network Passive Startup & Security

The Startup & Security options are used to setup a passive's startup and Security Settings.

To set a passive:

To make a passive start when windows starts, click "Start Passive When Windows Starts" On.
To protect the passive from being closed with a password, click "Protect Program Close with Password".
To Allow the Setup to be accessed, click "Allow Passive Setup Access" On.

Click OK to set the changes.

The default setting is all off.
For example:
The Passive does not start when windows starts. It is not protected from being closed with a password and the setups cannot be accessed without a password.