Base / Remote DIP Switch A

ZigBee Wireless Data Links
Base / Remote DIP Switch A

A base can be addressed from Node 0 to Node 32
A base must have a different address from all other stations on the local data loop
The remote must have a unique address from the base (from node 0 to node 32)
The remote can have the same address as local stations or the station that is wired to it.
Two remotes should not have the same address

DIP Switch A Address/Baud Rate

Address Settings Table

DIP Switch A Address

* Microscan position.
The base does not support operation at 4800 baud (as was required on a dataloop with Shimaden FP21 controllers).