Panel Mount
The IN-uP4 is a universal single input indicator, which makes interface with a wide range of sensors easy.
The IN-uP4 has a 4-digit LED display. An option to add two relay outputs (with two setpoint indicator LED’s), and one 4~20mA analogue output is available. The indicator (Rev 1) has a Universal Power Supply of 24~250Vac / 19.5~250Vdc.
Setup and calibration is simple, using ‘uP Configure’ software, with step-by-step instructions.
| Input Specifications: | |
| Excitation - Sensor Power Supply | +22Vdc ±10%, 25mA max. |
| Accuracy/Repeatability | 0.05% of FSO. |
| Temperature Drift | 30ppm/°C typical. |
| Voltage Input Specifications: | |
| mV Range | -200mV~200mV. |
| V Range | 0~1V, 0~10V, -10~30V, 0~300V. |
| Minimum Input resistance | 1MΩ. |
| Linearity and Repeatability | <±0.02% FSO typical. |
| Response Time | 100msec. |
| USB Programmable Zero | 0~±99% of the Span. |
| USB Programmable Span | 95% of FSO. |
| Current Input Specifications: | |
| mA Range | 0~20mA (4~20mA). |
| Input Resistance | 10Ω. |
| Maximum Over-range | 50mAdc Continuous. |
| Linearity and Repeatability | <±0.02% FSO typical. |
| Response Time | 100msec. |
| USB Programmable Zero | 0~±99% of the Span. |
| USB Programmable Span | 1µA~24mAdc. |
| Thermocouple Input Specifications: | |
| Thermocouple Types | B, E, J, K, N, R, S, T. |
| Input Impedance | 1MΩ Minimum. |
| T/C Lead Resistance | 100Ω Maximum. |
| Cold Junction Compensation | -10~70°C. |
| Accuracy | E, J, K, N, T <±1°C. B, R, S <±2°C. |
| Temperature Drift | E, J, K, N, T <±0.05°C. B, R, S <±0.2°C. CJC Error <±2°C. |
| Sensor Fail | Upscale or Downscale Selectable (Upscale Default). |
| Response Time | 400msec. |
| USB Programmable Zero | 0~±99% of the Span. |
| USB Programmable Span | Within Thermocouple Type limits. |
| RTD Input Specifications: | |
| RTD Input | Pt100 or Pt1000 DIN 3-wire Type. (2-wire can be used with offset calibration.) |
| Sensor Current | 0.3mA Nominal. |
| Lead Wire Resistance | Pt100: 10Ω/wire Maximum. Pt1000: 5Ω/wire Maximum. 0.02% FSO Offset Error per Ω of Lead Resistance. Sensor Fail Upscale or Downscale Selectable (Upscale Default). |
| Linearity (Pt100) | 0.02% FSO for Span Inputs ≤200°C. 0.1% FSO for Span Inputs ≤300°C. |
| Linearity (Pt1000) | 0.02% FSO for Span Inputs ≤200°C. 0.2% FSO for Span Inputs ≤300°C. |
| Response Time | 400msec. |
| USB Programmable Zero | 0~±99% of the Span. |
| USB Programmable Span | Within Thermocouple Type limits. |
| NTC Thermistor Input Specifications: | |
| NTC Sensor Types | 10K (Beta 3984) -55~125°C. 10K (Beta 3435) -50~110°C. |
| Response Time | 100msec. |
| Pulse & Frequency Input Specifications: | |
| Input Type | Open Contact: NPN, 24Vdc Max. PNP, 5Vdc Max. |
| Frequency Range | 0~2000Hz. |
| Response Time | 100msec. |
| Software Modes | General Frequency, Flow Rate or RPM. |
| Potentiometer Input Specifications: | |
| Potentiometer input | 3-wire. |
| Excitation voltage | Variable. |
| Field programmable zero | 0~90% of span. |
| Potentiometer resistance | <1kΩ low pot; 1~4kΩ med pot; 4~20kΩ high pot. |
| Field programmable span | 0.1~100%. |
| Linearity and repeatability | <±0.05% FSO typical. |
| Response time | 100msec. |
| Output Specifications: | IN-uP4X only. |
| Analogue Output: | Isolated. |
| mA Range | 4~20mA or 20~4mA. |
| Resolution | 1µA. |
| Output Drive | 600Ω at 12Vdc. |
| Relay Outputs: | 2 Isolated Relays with LED indication on each output. |
| Functions | 2 on Board Controllers can be used as Set Point (SV), Switching Differential, Auto/Manual, Manual Output Setting, Dual Action Control, Single Action Control, Heat/Cool, Cool Only, Heat Only. |
| Relay Ratings | 250Vac, 3A Max. |
| General Specifications: | |
| Power Supply: | 24~250Vac / 19.5~250Vdc (47-63Hz, 6VA max). |
| Safety Compliance: | |
| EMC Emissions | EN 61326. |
| EMC Immunity | EN 61326. |
| Safety | EN 61010-1. |
| General Specifications: | |
| Accurate to | <±0.03% FSO typical. |
| Ambient drift | <±0.003%/°C FSO typical. |
| EMC Influence | <0.2% of full scale range. |
| Noise Immunity | 125dB CMRR average (2.0KVdc limit). |
| Operating Humidity | 5~85%RH max (non-condensing). |
| Operating Temperature | -10~50°C. |
| Storage Temperature | -20~60°C. |
| Indicator Housing: | IP65. |
| Dimensions | H=48mm, W=95mm, D=84mm. Allow 80mm minimum behind panel for connectors and wiring. |
| Panel Cutout | H=45mm, W=92mm. |
Use uP Configure software to program:
uP4 Configure offers a simple interface for connecting to your compatible device, and a range of flexible configuration options, including an extensive library of pre-calibrated ranges and linearization tables for advanced scaling.
| Code | Specifications | Price | Quantity | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| IN-uP4 | Universal Input Indicator with No Outputs. | $279.00 | |||||||||
| IN-uP4X | Universal Input Indicator with 2 x Relay Outputs and 1 x 4~20mA Analogue Output. | $378.00 | |||||||||
| XU-USB. | USB Programming Key | $120.00 | |||||||||
Not sure what you need? Ask us anything!
