Intech Instruments Ltd

Instrumentation • Monitoring • Control

My Order0
Home | Products | Controllers & Displays | Displays & Indicators | Process Displays | uP4-Din

uP4-Din – Universal Input Indicator

Universal Input Indicator, Din-Rail, Controller, Transmitter.

Intech-uP4-DIN-Indicators
uP4-DIN-R2A
Intech XU-USB Programming Cable
uP4-Din-R2

uP4-Din Features:

  • Universal Input with Indication.
  • DIN Rail Mount.
  • Universal AC or DC supply 24~250Vac / 19.5~250Vdc.
  • Two Relay Outputs (with Setpoint LEDs).
  • Option to add One Retrans Analogue Output (4~20mA or 0~10Vdc selectable).
  • Programmable via USB Port using uP Configure Programming Software (version 1.5.23 or later) and the XU-USB (Rev 1) key.
  • Simple setup and calibration.
  • 4-digit LED display with Transparent Cover.
  • Sensor power supply (22Vdc, 25mA max)
  • Dimensions: H=112mm, W=23mm, D=120mm.
  • Low cost.
Brand: INTECH
Usually in stock
Request a quote
Scroll down for product range

The uP4-Din is a DIN rail mount, universal single input indicator, which gives easy interface with a wide range of sensors. It is also fitted with two relay outputs (with two setpoint indicator LEDs), and one optional retransmission analogue output (4~20mA or 0~10Vdc selectable).

The uP4-Din has a 4-digit LED front display, and a universal power supply of 24~250Vac / 19.5~250Vdc.

Setup and calibration is simple, using ‘uP Configure’ software (version 1.5.23 or later), with step-by-step instructions.

Input Specifications:
 Excitation - Sensor Power Supply+22Vdc ±10%, 25mA max.
 Voltage Input Specifications:
    mV Range-200mV~200mV.
    V Range0~1V, 0~10V, -10~30V, 0~300V.
    Minimum Input resistance1MΩ.
    Temperature Drift<50ppm/°C.
    Linearity and Repeatability<±0.02% FSO typical.
    Response Time100msec.
    USB Programmable Zero0~±99% of the Span.
   USB Programmable Span95% of FSO.
Current Input Specifications:
    mA Range0~20mA (4~20mA).
    Input Resistance10Ω.
    Maximum Over-range50mAdc Continuous.
    Temperature Drift<50ppm/°C.
    Linearity and Repeatability<±0.02% FSO typical.
    Response Time100msec.
    USB Programmable Zero0~±99% of the Span.
    USB Programmable Span1µA~24mAdc.
Thermocouple Input Specifications:
    Thermocouple TypesB, E, J, K, N, R, S, T.
    Input Impedance1MΩ Minimum.
    T/C Lead Resistance100Ω Maximum.
    Cold Junction Compensation-10~70°C.
    AccuracyE, J, K, N, T <±1°C.

B, R, S <±2°C.
    Temperature DriftE, J, K, N, T <±0.05°C.
B, R, S <±0.2°C.
    CJC Error<±2°C.
    Sensor FailUpscale or Downscale Selectable (Upscale Default).
    Response Time400msec.
RTD Input Specifications:
    RTD InputPt100 or Pt1000 DIN 3-wire Type.
(2-wire can be used with offset calibration.)
    Sensor Current0.3mA Nominal.
    Lead Wire ResistancePt100: 50Ω/wire Maximum. 0.02% FSO Offset Error per Ω of Lead Resistance.
Pt1000: 20Ω/wire Maximum. 0.002% FSO Offset Error per Ω of Lead Resistance.
    Linearity (Pt100)0.02% FSO for Span Inputs ≤200°C. 0.1% FSO for Span Inputs ≤300°C.
    Linearity (Pt1000)0.02% FSO for Span Inputs ≤200°C. 0.2% FSO for Span Inputs ≤300°C.
    Sensor FailUpscale or Downscale Selectable (Upscale Default).
    Response Time400msec.
    AccuracyBetter than 0.2°C.
    Temperature Drift<0.007°C/ C.
NTC Thermistor Input Specifications:
    NTC Sensor Types10K (Beta 3984)   -55~125°C.
10K (Beta 3435)   -50~110°C.
    Response Time100msec.
    AccuracyBetter than 0.2°C.
    Temperature Drift<50ppm/°C.
Pulse & Frequency Input Specifications:
    Input TypeOpen Contact: NPN, 24Vdc Max.
PNP, 5Vdc Max.
    Frequency Range0~2000Hz.
    Response Time100msec.
    Temperature Drift<50ppm/°C.
    Software ModesGeneral Frequency, Flow Rate or RPM.
Potentiometer Input Specifications:
    Potentiometer input3-wire.
    Excitation voltageVariable.
    Field programmable zero0~90% of span.
    Potentiometer resistance<1kΩ low pot; 1~4kΩ med pot; 4~20kΩ high pot.
    Field programmable span0.1~100%.
    Linearity and repeatability<±0.05% FSO typical.
    Response time100msec.
    Temperature Drift<50ppm/°C.
Output Specifications:
    Analogue Output:Output type software selectable.
        mA Range0~20mA (4~20mA) Active.
        V Range0~10Vdc Active.
        Isolation1400Vrms for 1 minute. Working voltage 125V.
        Resolution0~20mA = 1µA.
0~10Vdc = 1mV.
        Output Drive20mA, 600Ω at 12Vdc.
        Temperature Drift<50ppm/°C.
        Accuracy / Repeatability0.05% of FSO.
    Relay Outputs:2 Isolated Relays with LED indication on each output.
        Functions2 on Board Controllers can be used as Set Point (SV), Switching Differential,
Auto/Manual, Manual Output Setting, Dual Action Control, Single Action Control,
Heat/Cool, Cool Only, Heat Only.
        Relay Type & RatingsRelay 1: Form A, 3A max 120/240Vac or 28Vdc (resistive load).
Relay 2: Form C, 10A max 120/240Vac or 28Vdc (resistive load).
        Life Expectancy100K cycles minimum at full load rating.
    Power Supply Specifications:24~250Vac / 19.5~250Vdc (47-63Hz, 6VA max).
        Isolation2300Vrms for 1 minute to all inputs and outputs.
Certification & Compliance:
        Immunity to Industrial LocationsEN 61326-1.
        EmissionCISPR 11 Class A (EN 61326).
        Safety Requirements for Electrical Equipment for Measurement Control, and Laboratory Use:EN 61010-1 General Requirements.
EN 61010-2-030 Particular Requirements for Testing and Measure Circuits.
Environment Specifications:
        Operating Temperature-10~50°C
        Operating Humidity5~85% RH.
        Storage Temperature-20~60°C.
        AltitudeUp to 2000m above sea level.
Case Specifications:
        Enclosure RatingIP20.
        DIN Rail Mount35mm.
        Display4 digits with Plastic Protective Flap.
        Weight 177g (including plugs).
        Dimensions H=112mm, W=23mm, D=120mm.

Smart, simple software to program your uP4 products

 

Download uP Configure Programming Software

uP Configure - Intech Instruments

Note: Requires the XU-USB programming key

Use uP Configure software to program:

uP4 Configure offers a simple interface for connecting to your compatible device, and a range of flexible configuration options, including an extensive library of pre-calibrated ranges and linearization tables for advanced scaling.

Product Range

Product Range:
CodeSpecificationsPriceQuantity
uP4-DIN-R2

Din Rail Indicator with 2 x Relay Outputs.

 $358.00
uP4-DIN-R2A

Din Rail Indicator with 2 x Relay Outputs and 1 x 4~20mA Analogue Output.

 $460.00
XU-USB_

USB Programming Key

 $120.00
All prices are in NZ$, and GST exclusive and are subject to change without notice.

Intech is our own brand of products, for all aftersales and technically support please contact us.

Not sure what you need? Ask us anything!

Footer

Intech Christchurch

59 Mandeville Street
Riccarton, Christchurch 8011

Phone: (03) 343 0646

Email: sales@intech.co.nz

Intech Auckland

70 Central Park Drive
Henderson, Auckland 0610

Phone: (09) 827 1930

Email: aucksales@intech.co.nz

Newsletter

Subscribe to our newsletter and get new information every month.