HR Series - Mini Portable Data Loggers:

Please select a product below:

Description:

HR Series loggers are small, single and multi channel loggers housed in a rugged 20mm diameter 304 stainless steel case. High accuracy and large storage capacity make the HR series ideal for most industrial and commercial applications.
The HR loggers can also be left connected permanently to the PC for instantaneous viewing of the data. All data is real time (time and date stamped).
All TruTrack loggers will connect directly to a modem for remote down loading of data and can also send SMS messages on an alarm condition.

Features:

  • 304 Stainless Steel case.
  • 1 to 5 year battery life depending on usage as below, user replaceable. Data is retained in the event of battery failure. Battery Status Monitor in Omni7 Software.
    • Warning: When using the Average, Maximum or Minimum reading(s), the logger reads the attached sensor(s) every second. This will reduce battery life.
    • Using the logger in temperatures below -5°C (23°F) will reduce battery life.
  • High Accuracy:
    • 16 bit = HT-HR, Tc-HR, Pt-HR and mV-HR.
    • 12 bit = T-HR, WT-HR, pH-HR and GP-HR.
  • Over 500,000 readings can be stored (* except WT-HR).
  • User selectable sampling rate from 1 second to 10 hours in 1 second increments.
  • Operating range of -30°C to +70°C (-22°F to +158°F).
  • DLC3USB [USB] or DLC3 [RS232] download cable (2m) is used with all HR Series loggers.

Ordering Information:

Order code: Description:
T-HR Single Temperature
HT-HR Humidity & Temperature
Tc-HR Thermocouple Temperature, Accepts Type J, K, N, R and T probes (Does not include Thermocouple probe)
HHT-03 Type K Thermocouple Mini-Spear probe for Tc-HR, range -30/+300C (Other types of thermocouple probes are also available)
Tc-HR Plug Set 70mm lead (Specify thermocouple type). Includes Switchcraft plug (logger end) and Mini jack (connects to T/c Mini plug).
Mini plugs are also available on request.
Pt-HR RTD Pt100/Pt500/Pt1000 Temperature (Does not include RTD probe)
TP-Pt100 RTD Pt100 temperature probe for Pt-HR, range -100~150C
mV-HR ±50mV / ±100mV / ±200mV / ±400mV (Does not include test lead)
mV-HR Lead Test Lead set for mV-HR logger
WT-HR Water Level / Temperature (see WT-HR page for ordering codes)
pH-HR pH / Temperature (Does not include pH probe)
M-## pH probe pH probe for pH-HR. Note: We recommend using a pH probe that has a built in RTD Pt100 temperature sensor for the best possible accuracy with the pH-HR.
pH-HR Plug Set Fit plug set to pH probe for use with pH-HR logger.
GP-HR General Purpose (see GP-HR page for ordering codes)
Download options:

SWDL-DLC3USB
SWDL-DLC3
Omni7 Software (used with all TruTrack data loggers):
Omni7 Software Installation CD and USB download cable Kit
Omni7 Software Installation CD and RS232 download cable Kit

DLC3USB
DLC3
Spare download cable:
HR Series USB download cable (2m)
HR Series RS232 download cable (2m)


  • T-HRT-HR - Single Temperature

    The T-HR is a small single channel high resolution (12 bit) Temperature data logger.

    Download T-HR Datasheet

  • HT-HRHT-HR - Humidity & Temperature

    The HT-HR is a small Dual Channel High Resolution (16 bit) Humidity and Temperature data logger. The humidity and temperature sensors are housed in a 60 micron Stainless Steel filter at the top of the logger. The HT-HR (Mk 4) uses a Sensirion SHT15 digital humidity sensor giving ±2.0%RH accuracy from 10%RH to 90%RH.

    Download HT-HR Datasheet

  • Tc-HRTc-HR - Thermocouple Temperature

    The Tc-HR is a small Two Channel High Resolution (16 bit) Temperature data logger. The logger connects to an external Thermocouple probe and also has an internal temperature sensor for convenient logging of ambient temperature if desired.
    The logger accepts Type J, K, N, R and T thermocouple probes (factory set to Type K).

    The Tc-HR plug set is available for easy Thermocouple probe connection with the Tc-HR logger. It includes a Switchcraft plug (logger end), 70mm lead and Mini jack (connects to T/c Mini plug). Mini plugs are also available on request. Please specify the Thermocouple type required when ordering.

    Please Note: Tc-HR data loggers are not supplied with a Thermocouple probe. These can be ordered separately from Intech Instruments if required.

    Download Tc-HR Datasheet

  • Pt-HRPt-HR - External RTD (Pt100/Pt500/Pt1000) Temperature

    The Pt-HR is a small Two Channel High Resolution (16 bit) Temperature data logger. The logger connects to an external RTD Pt100, Pt500 or Pt1000 probe. It also has an internal temperature sensor for convenient logging of ambient temperature if desired.

    Please Note: Pt-HR data loggers are not supplied with a RTD probe. These can be ordered separately from Intech Instruments if required.

    Download Pt-HR Datasheet

  • mV-HRmV-HR - ±50mV / ±100mV / ±200mV / ±400mV

    The mV-HR is a small, two channel, high resolution (16 bit) Voltage data logger. It also has an internal temperature sensor for convenient logging of ambient temperature if desired.

    Please Note: mV-HR data loggers are not supplied with a test lead set. These can be ordered separately from Intech Instruments if required.

    Download mV-HR Datasheet

  • WT-HRWT-HR - Water Level / Temperature

    The WT-HR is a Three Channel, High Resolution (12 bit), Water Height and Dual Temperature data logger fitted with a water height probe. *64,000 sample capacity.

    A temperature sensor is located at the bottom of the water probe and another is mounted in the logger so both water and air temperatures can be logged.

    Please Note: The standard version of Water Logger is constructed from 304 Stainless. If the logger is used in brackish water that is warm, it can pit and corrode the stainless. We recommend the use of the version made from 316 stainless for such applications.

  • pH-HRpH-HR - pH / Temperature

    The pH-HR is a small three channel high resolution (12 bit) pH and Temperature data logger housed in a rugged 304 stainless steel case.

    The logger connects to an external pH probe and also has the option of connecting to an external RTD Pt100 temperature probe to allow temperature compensation of the pH reading. Many pH probes have a built in RTD Pt100 temperature sensor for convenient connection.
    The pH-HR logger also has an internal temperature sensor for convenient logging of ambient temperature if desired.

    Please Note: pH-HR data loggers are not supplied with a pH probe. These can be ordered separately from Intech Instruments if required. We recommend using a pH probe that has a built in RTD Pt100 temperature sensor for the best possible accuracy with the pH-HR.

  • GP-HRGP-HR - General Purpose

    The GP-HR is a small High Resolution (12 bit) Multi Purpose data logger housed in a rugged 304 stainless steel case, that can be configured to accept input from a wide variety of sources.
    It also has an internal temperature sensor for convenient logging of ambient temperature if desired.
    Storage capacity with the GP-HR mark 4 of over 1,000,000 8bit samples; or over 500,000 12bit samples!