| Network Setup |
| Licence Help |
The Licence Details information shows licence details for the networking software.
If the passive can be run "A Licence is available for this Passive to
Operate" will be shown.
If no licences are found "A Licence is Not available for this Passive to
Operate" will be shown along with a red cross.
Licence Requirements for each type of network software
| Network Type | Licence Needed |
| Active | A PXX licence is installed, that allows the Active software
to operate. |
| Passive | A licence is not installed. The number of Passives that can be used is determined by the PXX licences installed on the Network Active(s). |
| Auto Composite Passive User Defined Composite Passive |
A licence is not installed. The number of Passives that can be used is determined by the PXX licences installed on the Network Actives. Only one Passive Licence is used per computer, no matter how many actives this passive may be looking at. |
| Network Combo | A PXX licence is installed, that allows the Active software
to operate. The use of the Passive Pages does NOT use up a passive licence from the other network active(s) on this system. |
| Network Standby | Both Duty and Standby PCs are installed with PXX licences,
that allow the Active software to operate. It is recommended to use two dongle locked licences (one for each PC) to allow the rebuild of a new PC to be as quick as possible should that become neccessary. |
For more information on the different types of network software, see Network Definitions.