Back to Items IndexItem - Input via Recorder
Please refer to Adding a New Item for specific information on how to add an ITEM and how to change its properties.
Description
Is used to get data relating to a MicroScan Recorder Line.
Properties
| Class Name | A unique name for this item. The class name is display only and cannot be changed. |
| Name | Enter a meaningful name for this Item so that you, and other people, will easily recognize what it is for. |
| Enabled | No - The ITEM is not enabled and will not update
when its TASK updates Yes - The ITEM is enabled and will update when its TASK updates. |
| Type | Get Value - Gets the current value of the
Recorder Line Get Day Total - Gets the Day Total. Get Grand Total - Gets the Grand Total. Is In Alarm - 0 = Is not in alarm, 1 = I is in alarm. Is In Error - 0 = Is not in error, 1 = is in error. Is Enabled - 0 = Is not enabled, 1 = is enabled. Get Day Min - Gets the Day Minimum Value. Get Day Max - Gets the Day Maximum Value. Get Grand Min - Gets the Grand Minimum Value. Get Grand Max - Gets the Grand Maximum Value. Get Hi Setpoint - Gets the Hi Setpoint. Get Lo Setpoint - Gets the Lo Setpoint. Is Alarm Enabled - 0 = Alarm is not enabled, 1 = Alarm is enabled. Get Hi Alarm Delay - Gets the Hi Alarm Delay. Get Lo Alarm Delay - Gets the Lo Alarm Delay. Is Alarm Counting - 0 = An alarm condition does not exist, 1 = An alarm condition does exist and the Line is either already in alarm or is counting down from the Alarm Delay to go into alarm. Get Alarm Timer - If there is an alarm condition this option gets the number of seconds left before the Line will go into Alarm. Get Calibration Value - Gets the calibration value. Get State of Alarm Relay N - Gets the state of the specified Recorder Alarm Relay. 0 = Disabled, Greater than 0 = Enabled. |
| Recorder Line | Select the MicroScan Recorder Line from which to get the data. |