This section covers connections to 2300-XX via USB, RS232 and Ethernet. See

• Connect via USB485
• Connect via 2100-IS
• Connect via 2100-NS
• Connect via 2300-NET
• 2300 NET Reset IP Address

2300 Comms Notes:

1. Use Terminating resistors with 2300-XX stations
2. Do not plug in and out the 485/power connector on the station as you may damage the station.
3. The 2300 station R and T LEDs will light up at the same time, only when the station has recognized a valid command for it.
4. Use Find Stations to check that 2300-XX stations are operating correctly.