| Date Added |
Issue |
| 1/9/2005 |
The microscan software will not run and
mscanv5.exe cannot be found |
| 5/9/2005 |
How do I setup the V4 Image Interface to
imitate another V4 PLC Interface ? |
| 7/9/2005 |
How do I test the 2100-XX stations
offline (similar to sr25i image on Version 4) ? |
| 7/9/2005 |
How do I move a standard V5 Install to
another computer without an install CD ? |
| 7/9/2005 |
Setup Omron Interface to test with an
2100-A16 Omron PLC Message |
| 7/9/2005 |
Setting up a 2100-NET to use as a PLC
port redirector |
| 8/9/2005 |
How do I setup Shimaden SR50 Controllers
to work with Version 5 ? |
| 13/9/2005 |
Setting up an Omron CJM with the
MicroScan Omron Driver |
| 15/9/2005 |
How do I setup the Watchdog similar to
the Version 4 Watchdog program ? |
| 18/9/2005 |
Setup of Omron CQM/CPM PLC with CIF11
to 2100-IS/2100-NET. |
| 27/9/2005 |
How to do a delayed startup of Version
5 |
| 27/9/2005 |
How to use netcpy32 to backup Version 5
data to a network location (as was done in Version 4) |
| 16/12/2005 |
Windows XP Security Update Reboots
Computer |
| 17/2/2006 |
How do I tell the Version of Version 5
I am currently using ? |
| 17/2/2006 |
How do I tell the Version of Version 5
from a Backup I have been supplied ? |
| 22/2/2006 |
Check Network Connectivity with a
2100-XX-NET system |
| 24/2/2006 |
A 2100-A16 REV1 is not working, the TXE
and Beat LEDs are flashing together. |
| 21/3/2006 |
Example Steps Upgrading Version 3 to
Version 5 |
| 21/3/2006 |
How Do I backup My Data |
| 21/3/2006 |
How Do I view the data
stored in a store file |
| 21/3/2006 |
Summary of Version 4 to
Version 5 Changes |
| 22/3/2006 |
Record Low speed counters
in Version 5 |
| 26/4/2006 |
PLC Interface Not
Communicating properly |
| 26/4/2006 |
How do I view my V4 alarm
logs after a Version 5 Upgrade ? |
| 19/5/2006 |
Upgrade
Version 4 to Version 5 Steps on the same PC |
| 7/11/2006 |
Setting
up RS422/485 links on 2100-XX stations |
| 7/11/2006 |
Checklist
for using Shimaden SR23/FP23 with MicroScan |
| 7/11/2006 |
Using
Shimaden Parameter Assistant with Shimaden Lite |
| 7/11/2006 |
Using
Shimaden Modbus Controllers |
| 7/11/2006 |
MA5
Checklist for using with MicroScan |
| 7/11/2006 |
PC
wont Boot up when BAFO USB 232 converter installed |
| 7/11/2006
|
Using
Shimaden Lite with MicroScan - Module Details |
| 7/11/2006 |
Using
TC Inputs on 2100-A16 |
| 7/11/2006 |
2100-A16-NET
/ 2100-NET Ethernet Protocol |
| 7/11/2006 |
A
4-20 input on 2100-A16 or 2100-M connected to an A16 is always reading 100
%. |
| 7/11/2006 |
Example
setup steps for setting up a XPORT on 2100-A16-NET, 2100-NET |
| 7/11/2006 |
Example
setup steps for adding Ethernet station to MicroScan Version 5 with Add
Station Wizard |
| 7/11/2006 |
Importing
Version 4 Data into Version 5 |
| 7/11/2006 |
Change
the Serial PORT settings on a 2100-A16-NET / 2100-NET |
| 27/11/2006 |
Using
A16 RTX to a PLC - use only Deg C ranges |
| 27/11/2006 |
Using
Windows Remote Desktop Connection |
| 27/11/2006 |
How
to start Version 5 in the History Viewer mode |
| 27/11/2006 |
How
to copy graph displays to a word document |
| 27/11/2006 |
How
to setup a page for Automatic batch recording using a switch input |
| 25/1/2007 |
Using
2100-XX Power Supply on DC, linked for "M", do not use below 23
v DC |
| 12/3/2007 |
Using
Data Screen Large Data Readings |
| 12/3/2007 |
Mimic
Utility Button SetTagAll & Tag Alarm Delays |
| 12/3/2007 |
Mimic
Utility Button Set Alarm Output State |
| 27/3/2007 |
Tel
link radio connections |
| 4/6/2007 |
How
to set PC Anywhere host to answer after a set number of rings |
| 12/6/2007 |
Displaying
a Totaliser Value as a Lines Reading |
| 12/6/2007 |
Reading
2 words and displaying as a two word hours run time
|
| 12/6/2007 |
Recorder
Screen Colours |
| 12/6/2007 |
Toolbox
FO_Calc and Anti Virus Programs- Recorder Graph losing data |
| 12/6/2007 |
Network
showing number of passives in use |
| 12/6/2007 |
Network
Auto Setup Passive |
| 14/6/2007 |
How
to determine the locking information and hence supplier of a MicroScan V5 |
| 14/6/2007 |
Upgrade
Version 4 to Version 5 on a new PC |
| 2/7/2007 |
Display
KWh from a KW Transmitter |
| 2/7/2007 |
Change
a station from Local Port to 2100-NET Port |
| 5/12/2007 |
Sentinel
LM Dongle not found on computer (Purple Dongle) |
| 30/1/2008 |
Could
Not Upgrade Version 5 Files |
| 30/1/2008 |
Comms
Errors to IN2000-AI
- Graph Spikes and incorrect totals, average values |
| 30/1/2008 |
Memory
Leak Stops Version 5 from Working Properly (D Link USB Wireless) |
| 30/1/2008 |
Network
System Passive Licences Not working |
| 30/1/2008 |
Engineers
Checklist for Bad Comms |
| 31/1/2008 |
SR90
RTX value goes up and down |
| 5/2/2008 |
MicroScan
Diag Info and support files |
| 20/5/2008 |
Using
USB 485 to sniff data on a RS485 data loop |
| 20/5/2008 |
Using
a 2100-NET connection to Omron C Series PLC |
| 23/6/2008 |
Does
Omron Serial Driver support WR data area ? |
| 23/6/2008 |
2100-NET,A16-NET
Enable Packing Setting Must be ON or communications will not work |
| 23/6/2008 |
What
files are needed to be backuped in a networked MicroScan ? |
| 24/6/2008 |
How
to set the software protection mode of Version 4.1 ? |
| 1/7/2008 |
Changing
Software Version in MicroScan 4 |
| 4/7/2008 |
What
is the RS 485 TXE delay for a 2100-XX station ? |
| 17/7/2008 |
How
to Delete Html Help window size and position information (Tech Note) |
| 17/7/2008 |
Steps
to make a backup CD for a MicroScan V4 from a computers HDD (dead computer
but HDD OK) |
| 18/7/2008 |
DLP-D
Dongle not found on computer (drivers not loaded) |
| 18/7/2008 |
DLP-D
Dongle, USB-485 not found on computer |
| 18/7/2008 |
Example
Line Setup to show reading Watts from a Power Transducer |
| 21/7/2008 |
Testing
comms to 2300-XX stations |
| 21/7/2008 |
Testing
comms to 2300-XX with 2300-NET and IOStudio |
| 23/7/2008 |
Using
Process Explorer to Find Programs using Serial Ports |
| 23/7/2008 |
Example
setup to show tag retransmission |
| 23/7/2008 |
Example
setup to show Math Functions |
| 23/7/2008 |
Example
setup to show Station Good Alarms on Version 4 |
| 23/7/2008 |
Example
setup to show how to use Tag Watchdog to turn a relay on and off on a
regular basis |
| 25/7/2008 |
New
Math Function Sample and Hold |
| 5/8/2008 |
Key
Steps when adding new stations to MicroScan (Version 4 and 5) |
| 5/8/2008 |
Example
setup steps for setting up custom report in Version 5 |
| 5/8/2008 |
Why
does Find Stations report 32 stations found ? |
| 6/8/2008 |
How
to keep last lines value on comms failure ? |
| 6/8/2008 |
2100-M
Multiplexer giving bad readings on 2100-A16 |
| 6/8/2008 |
MicroScan
not Showing History data on line graph |
| 11/8/2008 |
Using
DLP-D dongle with USB-485 |
| 14/8/2008 |
Settings
for 2100-A16 RS232 The Warehouse |
| 14/8/2008 |
Readings
from a 2100-M connected to a 2100-A16 are not correct |
| 14/8/2008 |
How
do I scale values that are put in the custom report ? |
| 19/8/2008 |
Why
does Program Startup dialog show "SETTING REMOVED" next to Start
MicroScan when Windows Starts |
| 20/8/2008 |
How
do I tell what type of dongle is attached to the computer ? |
| 20/8/2008 |
Can
I use my lock to Computer ID lic*.txt file on a Windows Vista Computer ? |
| 22/8/2008 |
Shimaden
Lite will not save settings and displays Error Message on startup |
| 25/8/2008 |
Example
Setup for Mimic Recipes |
| 27/8/2008 |
Add
Station Wizard adds a 2100-A16 as an IN2000-XX station |
| 27/8/2008 |
Network
Status View showing 0 Licences, But Dongle Licence shows correct PX
licence code |
| 28/8/2008 |
Setup
Microscan to use a new Sentinel LM dongle, after old Sentinel LM dongle
lost |
| 28/8/2008 |
Why
is Register Software Link missing on Setup Tools screen |
| 18/9/2008 |
Security
Tab Missing On XP Folders |
| 18/9/2008 |
Checking
LM Dongle ID and matching to lic*.txt file without V5 running |
| 18/9/2008 |
V5
Omron PLC Driver to 2100-NET use only port 10001 |
| 18/9/2008 |
Setup
Recorder Data Screen for large text display |
| 18/9/2008 |
Start
V5 in SafeMode (Engineers Tests Only) |
| 18/9/2008 |
USB
to Serial Converter Lockups |
| 19/9/2008 |
Stop
V5 from loading accessory programs on startup |
| 19/9/2008 |
Correct
User Security settings for using MicroScan V5 |
| 19/9/2008 |
Purple
Dongle Register Software reports Access Denied (Code 5) when trying to
import licence file for a dongle |
| 23/9/2008 |
Viewing/Printing
Raw data recorded during a batch |
| 23/9/2008 |
Start
and Stop a batch based on a lines temperature value |
| 23/9/2008 |
Restricting
Line Graph so that it only shows the current batch being recorded |
| 26/9/2008 |
Change the serial port
assigned to a USB485 converter |
| 26/9/2008 |
Delete
MicroScan V4 From a Computer - NOT FOR USERS UPGRADING TO V5 |
| 8/10/2008 |
Converting
stations to RS485 when a RS422 data loop did not work |
| 8/10/2008 |
Wiring
2100-XX stations into a dataloop with IN2000-XX stations |
| 9/10/2008 |
Tag
Scanner Scan and Diagnostic Update |
| 10/10/2008 |
MicroScan
V4 Weldwell Electrotech Humidity control option |
| 10/10/2008 |
MicroScan
V4 Ramsey Roundwood/Fletcher Challenge Forests/Carter Holt Harvey Charge
Sheet |
| 10/10/2008 |
Using
TagTextSerial to display serial numbers from PLCs |
| 10/10/2008 |
Quick
Steps to determine 2100-XX comms connections |
| 15/10/2008 |
MicroScan
DLP-D Not found on a computer |
| 17/10/2008 |
Microscan
Network should not be set to same as Install Folder |
| 17/10/2008 |
Do
FP23 & SR23 work via a 2100-NET ? |
| 31/10/2008 |
Modbus
TCP to Unitronics PLC Socket Errors |
| 31/10/2008 |
Omron
C Series New V5 comms driver not working on 82801DB LPC Interface
Controller Board |
| 3/1/2008 |
Saving
shift total values to a custom report (shifts end at 8:00am and 4pm) |
| 3/1/2008 |
Configuring
Settings to hide network errors to 2100-NET, 2100-A16-NET stations |
| 3/1/2008 |
Sentinel
LM purple Dongle install leave install CD in drive when starting MicroScan
for first time |
| 4/1/2008 |
Using
a Mimic button to do an ADV step on a FP23 |
| 4/1/2008 |
Doing
Station Find on 2300-XX stations |
| 4/1/2008 |
Do
not put 2100-XX and 2300-XX stations on the same data loop |
| 16/3/2009 |
Definitions
and Limitations of MicroScan Passives |
| 16/3/2009 |
Setting
up a MicroScan Super Passive |
| 16/3/2009 |
Adding
a new station to MicroScan sample steps |
| 16/3/2009 |
Diagnosing Microscan
System - Stations |
| 16/3/2009 |
Using -ve numbers with an
Omron PLC |
| 16/3/2009 |
Summary of Operation for
Active Passive Networking |
| 16/3/2009 |
What are store file names
for Version 5 ? |
| 16/3/2009 |
Does 2100-MR produce 4mA
output for shorted RTD probes ? |
| 16/3/2009 |
Netcopy update to ignore
copying *.mag files |
| 16/3/2009 |
Recorder RTX works only
for recorders 1-5 (pages 1-50). |
| 16/3/2009 |
Do Mimic pages work on a
network Passive ? |
| 16/3/2009 |
Checking Microscan for USB
lockup issues (USB485 - ftdi chip only). |
| 16/3/2009 |
New Passive Error Message
Displays |
| 16/3/2009 |
Comms Message garbled on
MOXA network units with small Message Time Count value. |
| 16/3/2009 |
Microscan V4 does not work
after installing to a new computer. |
| 16/3/2009 |
Microscan V5 does not work
after installing to a new computer. |
| 16/3/2009 |
What are the Version 4
Microscan passwords ? |
| 16/3/2009 |
Using DDE with Version 5. |
| 16/3/2009 |
Does a Microscan Passive
do auto print outs or custom reports ? |
| 16/3/2009 |
Adding Shimaden
controllers to an existing RS422 2100-A16 MicroScan. |
| 16/3/2009 |
How to view old Alarm logs
etc in Microscan V5 ? |
| 16/3/2009 |
What are Microscan Startup
Modes ? |
| 16/3/2009 |
Setting up a DI input for
hours run counting |
| 17/3/2009 |
Supported Modbus RTU
commands in Microscan Driver |
| 1/9/2010 |
Supported Options In
MicroScan Passives |
| 1/9/2010 |
S32evnt1.dll Win16 Error
Message on a passive |
| 1/9/2010 |
Why is the Microscan not a
service ? |
| 1/9/2010 |
Using Kinematics Serial
Converters with Modbus PLCs |
| 1/9/2010 |
Using a 2100-D pulse
counter to give distance meters per minute from an encoder |
| 1/9/2010 |
Setting up Microscan
within a Terminal Server Environment for Passives |
| 1/9/2010 |
Using Microscan Passive
Clients |
| 1/9/2010 |
2100-M connected to
2100-A16 channel hopping |
| 2/9/2010 |
Example Setups for Active on a Slow WAN |
| 2/9/2010 |
Example Setups for Passive on a Slow WAN |
| 2/9/2010 |
Data and Setup Auto Backup Tool |
| 2/9/2010 |
5.0.3000 Program Updates |
| 2/9/2010 |
How to Export Total Data
from History Store Files |
| 2/9/2010 |
Can Version 5 be used to
View Store Data from Version 4 |
| 3/9/2010 |
Common Alarm Relay Bank
Large (320 Relays) |
| 3/9/2010 |
Example Setup Steps Remote Passive |
| 3/9/2010 |
Example Setup Steps Passive Clients |
| 3/9/2010 |
Example Setup Steps Alarm Large Relay
Bank |
| 3/9/2010 |
Example Screen Changes 5.0.3000 |
| 3/9/2010 |
Backup Setups & Data
to move software to another machine - Fast Backup Setting |
| 7/9/2010 |
Floating Point store file
format |
| 7/9/2010 |
Auto Print Graph at store
file rollover |
| 14/9/2010 |
MA5 Changes for Windows 7 Operation |
| 14/9/2010 |
Energy Monitor Report 2010 Date Issue |
| 14/9/2010 |
Shimaden Controller COM setting cannot be set
via keyboard |
| 14/9/2010 |
Do Not Use Microscan within a Remote Desktop
Connection and restart Microscan |
| 15/9/2010 |
How to Use Lite 16/32 to talk to 2x2100-A16
RS232 stations |
| 22/9/2010 |
On a network system, how to view alarm setups
and enable changes made by passives |
| 27/9/2010 |
.NET use only x86 32 bit mode to access
Microscan DLLs |
| 29/9/2010 |
Alignment of printout on
Data Log prints |
| 29/9/2010 |
Adding a 2300-XX station
does not use a station serial number |
| 30/9/2010 |
Shimaden SD24 added to
Microscan / Shimaden Lite |
| 4/10/2010 |
What is the Max update
rate of a 2300-XX station via Modbus ? |
| 4/10/2010 |
Microscan V5
Administrator Support Information |
| 4/10/2010 |
Using Older 2000-IS
converters with RS485 |
| 4/10/2010 |
Are files copied by
Netcopy autodeleted ? |
| 4/10/2010 |
Strange file names appear
in shared network folder (CA etrust AV scanner) |
| 5/10/2010 |
Metal case 2100-IS and
RS485 with 2100-A16 |
| 6/10/2010 |
FP93 Questions - DI
Pattern Selection & Restart Pattern on Power Cycle |
| 6/10/2010 |
Advanced - Make V5 Job
Based only on V4 Recorder .set file |
| 19/10/2010 |
2100-IS and 2100-NS
Differences |
| 19/10/2010 |
Is SRS11,12,13 supported
via Shimaden Lite ? |
| 21/10/2010 |
MicroScan Network Passive
cannot access network licence |